MOTION - II
PROCEDURE
A. Making Velocity Graphs
Graph 1: Walking away from the detector
2. Activate the LoggerPro link and stand about 0.5 meter from the detector, have your partner click Collect, and walk away from the detector slowly and steadily. Practice this a few times until you can generate a graph with none, or just a few erratic segments.
NOTE: If you need to alter the velocity or time scales so that the plot fills nearly all of the available space, click anywhere on the graph and change the velocity and/or time ranges which appear in the dialog box.
3. When you are satisfied with your results, select Store Latest Run from the LoggerPro EXPERIMENT menu.
4. Repeat the above procedure, but this time walk medium fast and steadily away from the detector.
5. When you are finished, copy the graph to the clipboard by selecting EDIT....COPY from the LoggerPro menu.
6. Return to the Worksheet window and PASTE the copied graph into cells A11...G25 on the Worksheet. Do this by placing the cursor in cell A11 and selecting EDIT....PASTE from the Worksheet menu.
7. Ignoring erratic parts of your plots caused by uneven walking or detector error, answer Questions 1 through 3 on the Worksheet.
Graph 2: Walking toward the detector
9. When you are satisfied with your graph, select Store Latest Run from the LoggerPro DATA menu.
10. Repeat by walking medium fast and steadily toward the detector.
11. When you are satisfied with your results, COPY and PASTE the graph into cells A47...G61 on the Worksheet. Resize as necessary (see note above).
12. Answer Question 4. Ignore erratic parts of the plot caused by uneven walking, etc.
• stop for 4 seconds
• walk toward the detector steadily
about twice as fast as before
• From the submenu, select the "free-hand" button .
• Practice
drawing by moving the pointer around while keeping the mouse depressed.
When you release the mouse, your line will appear with "handles". If acceptable,
click anywhere off the line. If not, delete the line by pressing the delete
key while the line is selected (i.e. while the "handles" are showing),
reselect the "free-hand" drawing tool, and repeat.
If you use the polygon button and do not wish to make a closed figure, double click when you reach the end of your drawing.
3. Compare your prediction with that of your lab partner. Discuss your predictions and resolve any differences.
4. On the plot, extend the time scale to 20s by clicking on the graph and setting the x-axis limit. Also under the LoggerPro EXPERIMENT menu, choose Data Collection and set the length under the Collection Tab to 20 s.
5. Now do the experiment. Both you and your lab partner should move as described in Step1 above. When you are satisfied that you have the motion right, set up the LoggerPro detector and collect the data for this graph. COPY and PASTE the LoggerPro graph into cells A93...G108 of the Worksheet.
6. Answer
Question
5 on the Worksheet.
2. Now try to move so that you duplicate the Velocity.Match graph. Try a number of times until you match the graph as closely as possible. Everyone in the group should get a turn. Note the critical times and velocities in the figure before you begin.
3. When you are satisfied, COPY and PASTE the matched graph to the Worksheet in cells A120:G135.
4. Answer Questions 6 through 10 on the Worksheet.
5. When you have completed the Worksheet, print it out by selecting PRINT under the FILE menu, and use it to complete your lab report.